CPM1(PentiumM CompactPCI)
CPM1(PentiumM CompactPCI)概要
- インテルPentium M Processor™ プロセッサ（1.4 GHz)搭載
- PICMG® 2.16 Packet Switched Backplane (PSB)
CPM1(PentiumM Compact PCI)仕様
| 搭載プロセッサ | インテルPentium M Processor™ プロセッサ |
| プロセッサコア | インテルPentium M Processor™ プロセッサ |
| チップセット | インテル® 855GMEグラフィック/インテル® 6300ESB |
| インターフェース |
PLX Technology's PCI 6254 dual mode universal asynchronous 64-bit, 66Mhz PCI-to-PCI bridge. Universal Bridge supports system slot and peripheral slot operation. Transparent or Non-transparent modes for multi-processing. 1 KB Buffer for efficient PCI-PCI bridging, PICMG 2.16 Compliant. Hot Swapping is supported Lower cost blade versions available without CompactPCI. One PMCX site with 64 bit @ 66 MHz bandwidth is available on-board. I/O is routed through the P3 connector as well as through the front panel. An Intel 82546 Ethernet controller supports two 10/100/1000BaseTX Ethernet ports routed to the P0 connector in compliance with Vita 31.1 for backplane fabric switching or for alternate routing to an optional rear I/O card. An 82541 provides one 10/100/1000BaseTX port that is accessible from the front panel. 6300ESB I/O Controller Hub provides an integrated 32-bit 3D core at 133 MHz. DVI/RGB is accessible at the front panel via a high-density DVI-I connector and routed through P5, optionally. Primary ATA/100 DMA IDE interface is accessible from the P5 connector. PIO and bus master support. Secondary IDE port is routed to a Type II compatible CompactFlash connector for on-board booting. General Software's flash-based system BIOS with a variety of boot options including CD-ROM and PXE over Ethernet. Customized versions can be provided. Programmable watchdog timer for system recovery. DVI-I/VGA, Dual USB 2.0, 10/100/1000BaseTX port (Intel 82541PI), COM1 and one PMCX Breakout. Low Pin Count Bus(LPC) interface runs through P5, like COM ports, Floppy Disk Controller, Mouse/Keyboard interface, and LPT1 through an LPC compatible Super I/O device. Optionally COM2 and two distinct USB 2.0 ports may be routed through P5 instead of the LPC interface for applications that cannot use a rear plug-in card. Two Serial ATA ports, two 10/100/1000BaseTX ports and a VGA/DVI port (routed through P5). |
| サポートOS | Linux, QNX, VxWorks, Windows |
| 電源電圧 | 3.3V |
| フォームファクタ | 6U cPCI フォームファクター |
| サイズ（重量） | 233.5 mm (L) x 160 mm (W) |
| RoSH対応 | 対応 |
| 耐久環境 | 0°..+ 70°C（拡張耐久環境はオプションあり） |
CPM1(PentiumM CompactPCI)オプション
- N/A