Texas Instruments
Texas Instruments Eval boards
We have board support packages (BSPs) and complete projects available for various Texas Instruments Eval boards.
Different software packages are available for different boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.
Supported Eval boards
IAR TMS470R1B1M
- TMS470R1B1M (TI)
- ARM7TDMI
- TMS470R1B1M processor
- 1M-Byte Flash Program Memory
- 64K-Byte Static RAM
- 60-MHz System Clock
- High-End Timer with 12 Programmable I/O Channels
- 10-Bit, 12-Input Multi-buffered Analog-to-Digital Converter
- Potentiometer and thermistor wired to ADC 2 SPI
- 3 SCI, 2 ported to RS232 connectors
- 2 High-End CAN Controllers
- 5 I2C
- 32 character LCD Display
- 5 push buttons
- 16 user LEDs
- 20x20 prototyping area
- Supports 8- and 16-Bit Expansion Bus with 42 I/O Expansion Bus Pins
- Memory Security Module (MSM)
- JTAG Security Module
- Direct Memory Access (DMA) Controller - 32 Control Packets and 16 Channels
- Schematics included
- RoHS compliant
J-Link OEM versions
J-Link OEM versions
There are several different OEM versions of J-Link on the market. The OEM versions look different, but use basically identical hardware.
Some of these OEM versions are limited in speed, some of these can only be used with certain chips and some have certain add-on features enabled, which normally requires license.
In any case, it should be possible to use the J-Link software with these OEM versions. However, proper function cannot be guaranteed for OEM versions.
SEGGER Microcontroller does not support OEM versions; support is provided by the respective OEM.
- Analog Devices: mIDASLink
- Atmel: SAM -ICE
- Digi: JTAG-Link
- Freescale: J-Link Lite FSL
- IAR: J-Link / J-Link KS
- IAR: J-Link Lite
- IAR: J-Trace
- NXP: J-Link Lite LPC Edition
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ST STR750
ST STR750
- R750FV2T7
- ARM7TDMI-S
- Three 5V power supply options: Power jack, USB connection or daughter board
- RTC
- Audio play and record
- 3 RS232 connectors, one with hardware flow control
- USB 2.0 compliant with full speed (12Mb/s) data transmission
- CAN 2.0A/B connection
- Inductor Motor Control connector with 6 PWM output and Emergency Stop
- Debug and programming support via 20-pin JTAG connector
- Dot-matrix LCD module
- Joystick with 4-direction control and selector
- Extension connectors for daughter board or wrapping board
- 32/16-bit RISC architecture (ARM v4T)
- 32-bit ARM instruction set for maximum performance and flexibility
- 16-bit Thumb instruction set for increased code density
- Unified bus interface, 32-bit data bus carries both instructions and data
- Three-stage pipeline
- 32-bit ALU
- Small die size and low power consumption
- Coprocessor interface
- Extensive debug facilities:
- EmbeddedICE-RT real-time debug unit
- JTAG interface unit
- Interface for direct connection to Embedded Trace Macrocell(ETM)
ST MB784
MB784
- STM32F107VCT6
- ARM Cortex-M3
- Three 5 V power supply options: Power jack, USB connector or daughterboard.
- Boot from user Flash, system memory or SRAM.
- I2S audio DAC, stereo audio jack.
- 512 MByte (or bigger) micro SD cardTM.
- Both type A and B smartcard support.
- I2C compatible serial interface 64 Kbit EEPROM, MEMS and I/O expander.
- RS-232 communication.
- IrDA transceiver.
- USB-OTG full speed, USB MiniAB connector.
- IEEE-802.3-2002 compliant ethernet connector.
- Two channels of CAN2.0A/B compliant connection.
- Inductor motor control connector.
- JTAG and trace debug support.
- 3.2" 240x320 TFT color LCD with touch screen.
- Joystick with 4-direction control and selector.
- Reset, Wakeup, Tamper and User button.
- 4 color LEDs.
- RTC with backup battery.
- MCU consumption measurement circuit.
- Extension connector for daughterboard or wrapping board.
Included software components:
Product | Supported features | |
---|---|---|
embOS | Core | |
emWin | To come soon | |
emFile | Core + RAMDisk, MMC/SD, | |
emUSB Device | Core + Bulk, HID, MSD, CDC | |
emUSB Host | To come soon | |
embOS/IP | Core + Webserver, FTP Server, SMTP Client |
Eval package:
The eval packages have been designed to provide customers and potential customers with a complete, easy to use software package for the specified target hardware and target compiler. They allow to easily check out the target hardware, the target compiler and our software components. This evaluation process typically does not take a lot of time since the software can be easily recompiled and downloaded to the target.
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive testing the hard- and software for fitnes. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Filesystem examples:
The file system samples show basic directory and file operations. An explorer sample (emExplorer) is provided which allows browsing the content of the storage media used. |
TCP / IP examples:
Flasher STM8
Flasher STM8Flasher STM8 is a programming tool for STM8 series of flash microcontrollers. Main features
|