Back
現在地: Home 
パートナー segger-tools Flasher STM8 More
パートナー segger-tools Flasher STM8 More
Flasher STM8 More
Flasher STM8 - Flash programmer for STM8 series of flash microcontrollers with on-chip flash
Features
- All STM8 devices can be programmed
- Integrated optical isolation between host and target system
- Standard 4-pin SWIM connector
- USB 2.0 interface
- Full duplex 100Mbit Ethernet interface
- Target voltage can be measured & monitored during program
- Fully plug and play compatible
- USB, Ethernet, RS232 and 4-pin ribbon cable included
- Windows PC software included
- Target power supply via pin 1 of the 4-pin interface (up to 300mA to target with overload protection)
Subscribe to Flasher STM8 software notification Specifications
| General | |
|---|---|
| Supported OS | Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64 |
| Electromagnetic compatibility (EMC) | EN 55022, EN 55024 |
| Operating temperature | +5°C ... +60°C |
| Storage temperature | -20°C ... +65 °C |
| Relative humidity (non-condensing) | Max. 90% rH |
| Size (without cables) | 121mm x 66mm x 30mm |
| Weight (without cables) | 122g |
| Mechanical | |
| USB interface | USB 2.0, full speed |
| Ethernet interface | 100Mbit, full duplex |
| RS232 Host interface | RS232 9-pin |
| Target interface | SWIM 4-pin connector |
| SWIM interface, Electrical | |
| Power supply | USB powered, 100mA for Flasher STM8. 500mA if target is powered by Flasher STM8. |
| Target interface voltage (VIF) | 1.2V ... 5V |
| Target supply voltage | 4.5V ... 5V (if powered with 5V on USB) |
| Target supply current | Max. 300mA |
| LOW level input voltage (VIL) | Max. 40% of VIF |
| HIGH level input voltage (VIH) | Min. 60% of VIF |
Download speed
Flasher STM8 has been designed to allow downloading to the target as fast as the target can receive and program flash. The table below shows the measured download speed for standalone programming and for programming via PC driven software. The following testing environment has been used:
- PC with 2.53 GHz Core2Duo, running WinXP
- USB 2.0 port
- USB 2.0 hub
- STM8S208MBT6B
| Operation | Standalone mode | PC mode |
|---|---|---|
| Program (128kB) | 8.5s (15kB/s) | 8.5s (15kB/s) |
| Program and verify (128kB) | 11.3s | 11.3s |
