Back
現在地: Home 
パートナー segger-tools ST Microelectronics
パートナー segger-tools ST Microelectronics
ST Microelectronics
ST Microelectronics Eval boards
We have board support packages (BSPs) and complete projects available for various ST Eval boards.
Different software packages are available for different boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.
Supported Eval boards
IAR STM32-SK
Controller:
- STM32F103RBT6 (ST)
CPU:
- ARM Cortex-M3
Board main features:
- 16-character per line LCD display, two lines, 5x7 char
- Up to 16 User LEDs (depending on hardware configuration)
- Status LED
- Power-supply LED
- Three user-defined push buttons
- One Wake-up button
- Reset Button
- One Potentiometer (AN-TR)
- One SD card holder
- Two RS-232 ports
- One CAN port
- One USB device port
- Two RS232 connectors
- I2C routed to header pins
- I2S routed to header pins
- SPI routed to header pins
- Debug and programming support via 20-pin JTAG connector
- Powered via 400 mA supplied from J-Link-ARM-KS pin 19 or from external power, jumper selectable
- SD/MMC Card socket
- Prototype area
- Microphone jac
- Headphone jac
- RoHS compliant
IAR STR912-SK
Controller:
- STR912FAW44 / STR912FW44 (ST)
CPU:
- ARM966E-S
Board main features:
- JTAG interface connector
- Trace/Mictor connector
- Status LED
- Power-supply LED
- Reset button
- External power connector
- Powered via 400 mA supplied from J-Link-ARM-KS pin 19, jumper selectable
- Three RS232 connectors
- USB connector
- CAN connector
- SD/MMC connector
- Ethernet connector
- ADC support routed to header pins
- PWM outputs router to header pins
- Potentiometer (Trimpot)
- LCD: 16 characters per line, two lines, 5x7 char
- 16 user LEDs
- 4 user push buttons to simulate external events
- User wrap area
- RoHS compliant
ST MB525 Rev. B
Controller:
- STM32F103VBT6
CPU:
- ARM Cortex-M3
Board main features:
- Three 5V power supply options: Power jack, USB connector or daughter board
- Boot from User Flash, Test Flash or SRAM
- Audio play and record
- 64MByte MicroSD card
- Both type A&B Smart card support
- 8Mbyte serial Flash
- I2C/SMBus compatible serial interface temperature sensor
- 2 channels of RS232 communication with RTS/CTS handshake support on one channel.
- IrDA transceiver
- USB2.0 full speed connection
- CAN2.0A/B compliant connection
- Inductor Motor Control connector
- JTAG, SWD and Trace Debug support
- 122x32 dot-Matrix LCD and 240x320 TFT color LCD
- Joystick with 4-direction control and selector
- Reset, Wakeup, Tamper and User button
- 4 LEDs
- RTC with backup battery
- Extension connector for daughter board or wrapping board
ST MB672
Controller:
- STM32F103ZET6
CPU:
- ARM Cortex-M3
Board main features:
- Three 5V power supply options: Power jack, USB connector or daughter board.
- 128 Mbit serial Flash, 512Kx16 SRAM, 1Gbit NAND Flash and 128 Mbit NOR Flash.
- Boot from User Flash, System memory or SRAM.
- I2S Audio DAC, stereo audio jack.
- 128 MByte MicroSD card.
- Both type A&B Smart card support.
- I2C/SMBus compatible serial interface temperature sensor.
- 2 channels of RS232 communication with RTS/CTS handshake support on one channel.
- IrDA transceiver.
- USB2.0 full speed connection.
- CAN2.0A/B compliant connection.
- Inductor Motor Control connector.
- JTAG and Trace Debug support.
- 240x320 TFT color LCD
- Joystick with 4-direction control and selector.
- Reset, Wakeup, Tamper and User button.
- 4 LEDs.
- RTC with backup battery.
- Extension connector for daughter board or wrapping board.
ST MB784
Controller:
- STM32F107VCT6
CPU:
- ARM Cortex-M3
Board main features:
- Three 5 V power supply options: Power jack, USB connector or daughterboard.
- Boot from user Flash, system memory or SRAM.
- I2S audio DAC, stereo audio jack.
- 512 MByte (or bigger) micro SD cardTM.
- Both type A and B smartcard support.
- I2C compatible serial interface 64 Kbit EEPROM, MEMS and I/O expander.
- RS-232 communication.
- IrDA transceiver.
- USB-OTG full speed, USB MiniAB connector.
- IEEE-802.3-2002 compliant ethernet connector.
- Two channels of CAN2.0A/B compliant connection.
- Inductor motor control connector.
- JTAG and trace debug support.
- 3.2" 240x320 TFT color LCD with touch screen.
- Joystick with 4-direction control and selector.
- Reset, Wakeup, Tamper and User button.
- 4 color LEDs.
- RTC with backup battery.
- MCU consumption measurement circuit.
- Extension connector for daughterboard or wrapping board.
ST STR750
Controller:
- R750FV2T7
CPU:
- ARM7TDMI-S
Board main features:
- Three 5V power supply options: Power jack, USB connection or daughter board
- RTC
- Audio play and record
- 3 RS232 connectors, one with hardware flow control
- USB 2.0 compliant with full speed (12Mb/s) data transmission
- CAN 2.0A/B connection
- Inductor Motor Control connector with 6 PWM output and Emergency Stop
- Debug and programming support via 20-pin JTAG connector
- Dot-matrix LCD module
- Joystick with 4-direction control and selector
- Extension connectors for daughter board or wrapping board
