IAR STM32-SK
IAR STM32-SK
Controller:
- STM32F103RBT6 (ST)
CPU:
- ARM Cortex-M3
Board main features:
- 16-character per line LCD display, two lines, 5x7 char
- Up to 16 User LEDs (depending on hardware configuration)
- Status LED
- Power-supply LED
- Three user-defined push buttons
- One Wake-up button
- Reset Button
- One Potentiometer (AN-TR)
- One SD card holder
- Two RS-232 ports
- One CAN port
- One USB device port
- Two RS232 connectors
- I2C routed to header pins
- I2S routed to header pins
- SPI routed to header pins
- Debug and programming support via 20-pin JTAG connector
- Powered via 400 mA supplied from J-Link-ARM-KS pin 19 or from external power, jumper selectable
- SD/MMC Card socket
- Prototype area
- Microphone jac
- Headphone jac
- RoHS compliant
Controller main features:
- Implements the ARM architecture v7-M
- Thumb-2 instruction set (Enhanced levels of performance, energy efficiency, code density, mixed mode capability, ARM levels of performance with Thumb level code density)
- Memory Protection Unit (MPU)
- Embedded Trace Macrocell(ETM)
- Data Watchpoint and Trace unit (DWT)
- Flash Patch and Breakpoint unit (FPB)
- Debug Port (SW-DP or SWJ-DP)
- Single cycle multiply and hardware divide instructions
- Preconfigured memory map
- Up to 4 gigabytes of addressable memory space
- Predefined addresses for code, memory, external devices, peripherals
- Dedicated space for vendor specific addressability
- Atomic bit manipulation with bit banding (Direct access to single bits of data)
- Unaligned data storage and access
- Integrated sleep modes (Sleep Now, Sleep on Exit)