Back
現在地: Home 
パートナー segger-tools ST MB525 Rev. B
パートナー segger-tools ST MB525 Rev. B
ST MB525 Rev. B
ST MB525 Rev. B
Controller:
- STM32F103VBT6
CPU:
- ARM Cortex-M3
Board main features:
- Three 5V power supply options: Power jack, USB connector or daughter board
- Boot from User Flash, Test Flash or SRAM
- Audio play and record
- 64MByte MicroSD card
- Both type A&B Smart card support
- 8Mbyte serial Flash
- I2C/SMBus compatible serial interface temperature sensor
- 2 channels of RS232 communication with RTS/CTS handshake support on one channel.
- IrDA transceiver
- USB2.0 full speed connection
- CAN2.0A/B compliant connection
- Inductor Motor Control connector
- JTAG, SWD and Trace Debug support
- 122x32 dot-Matrix LCD and 240x320 TFT color LCD
- Joystick with 4-direction control and selector
- Reset, Wakeup, Tamper and User button
- 4 LEDs
- RTC with backup battery
- Extension connector for daughter board or wrapping board
Controller main features:
- Implements the ARM architecture v7-M
- Thumb-2 instruction set (Enhanced levels of performance, energy efficiency, code density, mixed mode capability, ARM levels of performance with Thumb level code density)
- Memory Protection Unit (MPU)
- Embedded Trace Macrocell(ETM)
- Data Watchpoint and Trace unit (DWT)
- Flash Patch and Breakpoint unit (FPB)
- Debug Port (SW-DP or SWJ-DP)
- Single cycle multiply and hardware divide instructions
- Preconfigured memory map
- Up to 4 gigabytes of addressable memory space
- Predefined addresses for code, memory, external devices, peripherals
- Dedicated space for vendor specific addressability
- Atomic bit manipulation with bit banding (Direct access to single bits of data)
- Unaligned data storage and access
- Integrated sleep modes (Sleep Now, Sleep on Exit)
Available software:
Subscribe to ST MB525 Rev. B eval software notification 