Texas Instruments (Luminary)
Texas Instruments (Luminary Micro) Eval boards
We have board support packages (BSPs) and complete projects available for various Luminary Micro Eval boards.
Different software packages are available for different boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.
Supported Eval boards
Luminary LM3S1968
- LM3S1968
- ARM Cortex-M3
- Support for battery-backed hibernate mode
- OLED graphics display with 128 x 96 pixel resolution
- User LED, navigation switches, and select pushbuttons
- Magnetic speaker
- LM3S1968 I/O available on labeled break-out pads
- Standard ARM® 20-pin JTAG debug connector with input and output modes
Luminary LM3S2965 CAN
- LM3S2965
- ARM Cortex-M3
- Fully operational CAN Network-in-a-box
- 128x64 pixel 16-shade monochromatic OLED display
- User-programmable push buttons and LED
- Magnetic speaker
- Convenient reset push button and power indicator LED
- Serial in-circuit debug interface over USB
- Powered over USB with included USB cable
- Break-out pads for all LM3S2965 I/O
Luminary LM3S3748 EVB
- LM3S3748
- ARM Cortex-M3
- 128x128 CSTN LCD graphics display
- USB host connector
- MiniUSB device connector
- External +3.3V power supply
- 2 channel oscilloscope
- MicroSD card slot
- 3 status LEDs
- Reset push button
- Debugger USB interface
- JTAG/SWD connector
Luminary LM3S6965 Ethernet
- LM3S6965
- ARM Cortex-M3
- 10/100 Ethernet
- Simple setup: USB cable provides serial communication, debugging, and power
- OLED graphics display with 128 x 64 pixel resolution and 16 shades of gray
- User LED, navigation switches, and select pushbuttons
- Magnetic speaker
- All LM3S6965 I/O available on labeled break-out pads
- Standard ARM® 20-pin JTAG debug connector with input and output modes
- microSD card slot
Luminary LM3S8962
- LM3S8962
- ARM-Cortex M3
- fully-integrated 10/100 embedded Ethernet controller
- OLED graphics display with 128 x 96 pixel resolution
- User LED, navigation switches, and select pushbuttons
- Magnetic speaker
- LM3S8962 I/O available on labeled break-out pads
- Standard ARM® 20-pin JTAG debug connector with input and output modes
- Standalone CAN device board using Stellaris LM3S2110 microcontroller
Luminary LM3S9B90
- LM3S9B90
- ARM-Cortex M3
- fully-integrated 10/100 embedded Ethernet controller
- USB 2.0 Full-Speed OTG port
- Virtual serial communications port capability
- Oversized board pads for GPIO access
- Reset pushbutton and power LED
- User pushbutton and LED
Luminary LM3S9B96
- LM3S9B96
- ARM-Coretx M3
- LCD Display with Touch
- Ethernet controller
- Reset pushbutton and power LED
- User pushbutton and LED
- USB Connector
- Ethernet Connector